All Products

Laser-Engraved Surface Enhanced Quartz Pillars ♾️

Precision laser-engraved with an intricately woven micro-lattice, creating thousands of defined peaks and valleys to maximize effective surface area and vapor nucleation sites♾️

Maximizing low-temperature terpene release and earlier vapor initiation for exceptional flavor and efficiency ♾️

The engineered micro-lattice promotes efficient heat transfer and vapor formation, allowing concentrates to vaporize more effectively at lower operating temperatures ♾️

Chamfered top and bottom edge's♾️

Keeps the pillar low in your slurper or tower so you’re terps don’t get wasted♾️

Polished with precision♾️

Made in North America with GE214 Quartz

Experience the flavor, heat retention, purity and durability of North American made quartz inside your Puffco Pro & Link♾️

3 directional heating, with heated walls and bottom♾️

The insert is 20% larger than the stock 3DXL ceramic heater♾️

Same size metal housing as the Puffco 3DXL so it fits your favourite Puffco silicone tether♾️

Precision laser-engraved with an intricately woven micro-lattice, creating thousands of defined peaks and valleys to maximize effective surface area and vapor nucleation sites♾️

Maximizing low-temperature terpene release and earlier vapor initiation for exceptional flavor and efficiency ♾️

The engineered micro-lattice promotes efficient heat transfer and vapor formation, allowing concentrates to vaporize more effectively at lower operating temperatures ♾️

The quartz insert reads about 50°- 80°F lower than the ceramic chamber due to the heat transfer from ceramic to quartz, Set your Puffco 50-80°F hotter than usual for the desired temp! ♾️

Recommended temperature setting: 580°F for full clouds and flavor with medium to large size dabs♾️

It is recommended to increase your dab duration in the app to 1 minute, to allow for the heat transfer to the quartz insert while the chamber heats up♾️

With the most recent firmware update to the puffco link, it has a slight issue of sometimes not recognizing the chamber as compatible (but only with the link, not the puffco pro itself). To fix this issue, you just have to unscrew it and screw it back in, then it works fine. If you're not using it with the link, you can ignore this, it has no issues with the Puffco pro not recognizing it as compatible♾️

Quartz insert made in North America🇺🇸🇨🇦

Chamber made in China

Clean with 99% ISO only, 91% iso has water and not ideal for cleaning electrical components.

3 month warranty (not valid if purchaser does not properly maintain the chamber with regular cleaning)

Reviews

Experience the flavor, heat retention, purity and durability of North American made quartz inside your Puffco Pro & Link. 

3 directional heating, with heated walls and bottom.

Polished for easy cleaning.

Recommended temperature setting: 580°F for full clouds and flavor with medium to large size dabs.

The quartz insert reads about 50°- 80°F lower than the ceramic chamber due to the heat transfer from ceramic to quartz, Set your Puffco 50-80°F hotter than usual for the desired temp! 

It is recommended to increase your dab duration in the app to 1 minute, to allow for the heat transfer to the quartz insert while the chamber heats up.

With the most recent firmware update to the puffco link, it has a slight issue of sometimes not recognizing the chamber as compatible (but only with the link, not the puffco pro itself). To fix this issue, you just have to unscrew it and screw it back in, then it works fine. Please see the attached video for a demonstration. If you're not using it with the link, you can ignore this, it has no issues with the Puffco pro not recognizing it as compatible. 

Quartz insert made in North America🇺🇸🇨🇦

Chamber made in China.

Clean with 99% ISO only, 91% iso has water and not ideal for cleaning electrical components.

3 month warranty (not valid if purchaser does not properly maintain the chamber with regular cleaning)

 Reviews

Experience the flavor, heat retention, purity and durability of North American made quartz inside your Dr. Dabber Switch go!♾️

Precision laser-engraved with an intricately woven micro-lattice, creating thousands of defined peaks and valleys to maximize effective surface area and vapor nucleation sites♾️

Maximizing low-temperature terpene release and earlier vapor initiation for exceptional flavor and efficiency♾️

The engineered micro-lattice promotes efficient heat transfer and vapor formation, allowing concentrates to vaporize more effectively at lower operating temperatures♾️

Polished to perfection for easy qtiping and cleaning!♾️

Made in North America♾️

Shipped from New York♾️ & Toronto♾️

Our Terp Splitter features sharp angled airflow slits, providing maximum spinning function while keeping the pillar, beads & oil low in the bucket & not down the neck♾️

16mm Diameter♾️

3mm Thick walls♾️

55mm Joint Distance♾️

4mm Thick Bottom♾️

70mm Tall♾️

30mm Diameter Bottom Dish♾️

55mm Length Joint Neck♾️

Angled AirFlow Slits♾️

Clear Quartz or Lattice Surface Enhanced Pillar Included♾️

Marble Cap Included♾️

Made in North America♾️

For function videos and reviews, go to out Instagram story highlights!

Tapered barrel to prevent splash & keep the pillar down♾️

Shall angled air flow slits, providing maximum spinning function while keeping the pillar, beads & oil low in the barrel & not down the neck♾️

3mm thick walls♾️

16mm Diameter ♾️

30mm Diameter, 4mm Thick Bottom♾️

70mm Tall Barrel♾️

Includes 1x Pillar♾️

Made in North America.

For function videos and reviews, go to out Instagram story highlights!

*Tiny Cosmetic Imperfections that do not Affect Function*

Our Terp Splitter features sharp angled slits, providing maximum spinning function while keeping the pillar, beads & oil low in the bucket & not down the neck♾️

16mm Diameter♾️

3mm Thick Walls♾️

4mm Thick Bottom

75mm Tall♾️

30mm Diameter Bottom Dish♾️

55mm Length Joint Neck♾️

Angled Slits♾️

Clear Quartz or Lattice Energy Pillar Included with each Terp Splitter♾️

Marble Cap Included

Made in North America

For function videos and reviews, go to out Instagram story highlights!

Tiny cosmetic imperfections that do not affect function.

25mm diameter bucket.

Includes a laser etched logo on the bottom.

Made in North America

For function videos and reviews, go to out Instagram story highlights!

Laser engraved surface enhanced quartz pillars♾️

Increased nucleation & surface area & unparalleled vaporization♾️

Precision laser-engraved with an intricately woven micro-lattice, creating thousands of defined peaks and valleys to maximize effective surface area and vapor nucleation sites♾️

Maximizing low-temperature terpene release and earlier vapor initiation for exceptional flavor and efficiency ♾️

The engineered micro-lattice promotes efficient heat transfer and vapor formation, allowing concentrates to vaporize more effectively at lower operating temperatures ♾️

Keeps the pillar low in your slurper or tower so you’re terps don’t get wasted♾️

Chamfered top and bottom edges♾️

Polished with precision♾️

Made in North America🇺🇸🇨🇦

Specifically made for Slurpers & Towers.

Increased nucleation!

Made in North America

For function videos and reviews, go to out Instagram story highlights!

Increases heat retention.

Adds nucleation.

Distributes heat evenly.

Spins with directional caps. 

18MM Cold Start Inserts

Made in North America 

Made in Denver, USA and Toronto, Canada.

Pre Load your insert and drop it in a fully heated banger!

sustained low temp terps!

Extends the life of your banger.

Made in Toronto, Canada & Denver, USA!

22mm tall

Ultra textured laser engraved surface super deep engraved pillar.

Increased nucleation & surface area.

Keeps the pillar low in the slurper or tower so you’re terps don’t get wasted.

Made in North America.

4mm thick disc bottom.

Fully worked seals.

Made in North America.

*Tiny Cosmetic Imperfections That do not Affect Function*

Tapered barrel to prevent splash & keep the pillar down♾️

Sharp angled slits, providing maximum spinning function while keeping the pillar, beads & oil in barrel & not down the neck♾️

70mm Tall♾️

3mm thick walls♾️

16mm Diameter ♾️

30mm bottom Diameter, 4mm Thick♾️

Includes 1x Pillar & 1x Cap ♾️

Made in North America.

Quartz 

Fits 14mm diameter (2mm Thick), 15mm Diameter (2mm-2.5mm Thick),16mm Diameter (2mm-3mm Thick) Splitters, TerpGuard Slurpers, Towers, Slurpers & Blenders.

Prevents plug falling off!

Lathe made perfectly flat.

Clean elegant design.

Handle prevents sticky fingers.

Made in North America.

For function videos and reviews, go to out Instagram story highlights!

3.5mm thick flat bottom.

Reverse Carved.

Made in North America.

For reviews check out Eternal_Quartz on Instagram!

Surface Enhanced Lattice Tech on the entire Terp Pearl, substantially increases surface area, providing unparalleled nucleation, heat retention and vaporization! Spins with ease with a spinner cap!

Only for use in Bangers, not towers or slurpers.

Made in North America.

Surface Enhanced Lattice Tech on the Quartz Terp pearl substantially increases surface area, providing unparalleled nucleation, heat retention and vaporization! Spins with ease with a spinner cap!

Made in North America.

Surface Enhanced Lattice Tech on the entire Puck, substantially increases surface area, providing unparalleled nucleation, heat retention and vaporization! Spins with ease with a spinner cap!

Made in Toronto, Canada & Denver, CO.

Reverse Carved

Our Terp Splitter features sharp angled airflow slits, providing maximum spinning function while keeping the pillar, beads & oil low in the barrel & not down the neck♾️

16mm Diameter♾️

3mm thick walls♾️

70mm Tall♾️

55mm Joint Distance♾️

30mm Diamater, 4mm Thick Bottom Dish♾️

4mm Thick Clear Bottom♾️

Angled Airflow Slits♾️

Marble Cap & Clear Quartz or Lattice Surface Enhanced Pillar Included with each Terp Splitter♾️

Made in North America♾️

For reviews check out @Eternal_Quartz on Instagram!

Surface Enhanced Lattice Tech on the entire puck, substantially increases surface area, providing unparalleled nucleation, heat retention and vaporization! Spins with ease with a spinner cap!

Made in Toronto, Canada & Denver, CO.

Boro 15mm Solid Marble

Fits 14mm & 16mm  Splitters, TerpGuard Slurpers, Towers, Slurpers & Blenders.

Made in North America.

For function videos and reviews, go to out Instagram story highlights!

Laser engraved lattice texture on the dabbing surface.

Increases surface area substantially, increasing nucleation and allowing vaporization at substantially lower temperatures when compared to clear or opaque quartz.

Made in North America.

Sandblasted German Made Borosilicate Terp Pearls Pack of 10

Adds a subtle Surface Enhancement Texture

Do not torch your banger, tower or Slurper with boro Terp Pearls inside, drop the boro pearls in after your banger has already been heated and cooled down to below 800°f.

Boro cannot withstand as high temperatures as quartz. 

Heating your quartz with Boro Terp Pearls inside can lead to breakage.